Chimney Top — Caps, Covers & Draft · Anchor Component

Integrated Crown-Cap Unit (Drip-Edge Crown + Cap)

A full stainless top that caps every flue and overhangs the crown to throw water clear of the masonry: the lasting answer to a cracked crown. Rather than patch concrete that will only re-crack, we cap the whole top in steel that sheds water for good. We will also tell you plainly whether the crown needs repair first or whether the cap on its own solves the problem.

Specification

What the listing decides

Material: Stainless steel
Store fit: Quote-to-fabricate

How this part is bought

The part follows the finding

No part in this store is a loose transaction. This one links back to the graded inspection that surfaces the need, and across to the install service it belongs to — both performed by the same trained crew.

Upstream

Chimney Inspection

The graded inspection that documents the need for this part before it ships.

Start here

Installed by

Chimney Crown

The install service this component attaches to, fitted to its listing by the same crew.

See the work

Every store quote includes

A fit check — flue size, alloy, venting, and clearances verified against your inspection
Written installed pricing before anything is ordered
Installation to the component's listing by trained technicians
Documentation that closes the finding — so the warranty, your insurer, and the next inspector all see a job done right

Chimney Top — Caps, Covers & Draft

Request a quote

No price is listed — that’s the standard, not a sticker. Installed pricing depends on your flue, alloy, venting, and access, and we confirm it in writing after a fit check. No payment is taken online.

Specify your custom cap

Built to your figures by our fabricator. Spec it here; every measurement is verified on the fit check before a single cut.

Cap style

Size variant

Material

Gauge

Outside measurements

Whole inches plus the fraction, for each side: A (top), B (right), C (bottom), D (left).

A — Topin

B — Rightin

C — Bottomin

D — Leftin

Add 1/2" of clearance to each of the A, B, C and D outside measurements before you submit — Plano fabricates to these exact figures, so the extra half-inch is what lets the finished cap seat over the masonry. I've added the 1/2" clearance to A, B, C and D.

Flue holes

Inside-hole measurements run from the outside edge to the edge of each hole, numbered from the top, then from the left — one pair per flue.

Number of flues

Hole 1

Skirt height

Leg height

Add-ons — available, priced on quote

Rush — faster turnaroundAvailable — priced on quote. (Plano's rush is a 2-business-day fabrication; we confirm the upcharge in writing, never a sticker price online.)Lifetime warrantyAvailable — priced on quote. Plano backs the fabrication for life; we confirm the cost in writing with the rest of the installed quote.

Every figure rides into the quote as your stated spec — confirmed on the measured fit check before fabrication. No price is taken online.

Include professional installationFitted to its listing by the trained crew as Chimney Crown. Leave it on — most parts here are a safety system, not a box you fit on a Saturday.

Pick a preferred window next — we confirm it by phone

(469) 992-4912

Keep browsing

More from the Chimney aisle

Copper Chase Cover (Custom-Fabricated)

A solid-copper chase top, fully sloped and standing-seamed, cut to your exact chase: the cover that outlives the house and ages into a patina instead of rusting into a stain down your siding. When the chimney is a real feature of the elevation, copper is the only cover we would put on it, because it never needs replacing and the lifetime cost beats a galvanized top you would redo twice. We template the chase ourselves, since a cover that is only close is a cover that lets water in.

View pageQuote

Architectural Multi-Flue Shroud (Decorative)

A sheet-metal shroud sized to the chase for genuine curb appeal, the line between a chimney that is merely capped and one that looks finished. This is a design piece and we build it like one: powder-coat or copper, corbel or hip-roof styling, proportioned so it reads right from the curb. We will not drop a stock cap on a custom home and call the roofline done.

View pageQuote

Powered Draft System (Enervex / Exhausto Inducer + Modulating Control)

A roof-mounted variable-speed fan on a sensor control that mechanically draws smoke up a stubborn flue and holds a steady draft. This is the last resort and never the first: nine times in ten a height correction, a cap change, or a liner sizing clears it for less, so we diagnose the draft fault before we ever quote a fan. When the geometry genuinely cannot draft on its own, this is the engineered fix, commissioned so it truly stops the smoke-back rather than masking it.

View pageQuote

Everything in Chimney Top — Caps, Covers & Draft

10+

Years

NFPA 211

Compliant

CSIA

Certified

< 2hr

Response

Ready when you are

Talk to a CSIA-certified expert today.

Free written quote. Same-week scheduling. 24/7 emergency response when you need it.

Book Free Inspection (469) 992-4912

Licensed & Insured Same-Week Scheduling Written Quote, Always

Emergency

24/7 Response

Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.

Emergency line